Debug.ino

Debug

This examples shows how use the debug macros for printing different kinds of debugging information

Boards:

AVR, AVR USB, Nano Every, Nano 33 IoT, Nano 33 BLE, UNO R4, Pi Pico, Due, Teensy 3.x, ESP8266, ESP32

Behavior

• Enable debugging by defining the DEBUG_OUT macro in src/AH/Settings/Settings.hpp or enable debugging globally as explained here
• Upload the sketch to the Arduino, and open the Serial Monitor (CTRL+Shift+M)
• Every five seconds, debugging information is printed, for example:

This is the result of `DEBUG`
[/home/pieter/GitHub/Arduino-Debugging/Example/Example.ino:12]: This is the result of `DEBUGREF`
[void loop() @ line 13]:    This is the result of `DEBUGFN`
[0:2:11.085]:   This is the result of `DEBUGTIME`
a = 1, b = 2, c = 3
log10(1000) - 2 = 1.00
millis() = 131085
Serial.read() = -1
[int someFunction(int) @ line 26]:  parameter = 42

See also

Debug for instructions on how to add an option in the Arduino IDE to easily enable and disable debugging globally without editing the settings file.

Written by PieterP, 2018-07-31
https://github.com/tttapa/Arduino-Helpers

 
#include <Arduino_Helpers.h>
 
#include <AH/Debug/Debug.hpp>
 
void setup() {
  Serial.begin(115200);
  while (!Serial)
    ;
}
 
void loop() {
  DEBUG("This is the result of `DEBUG`");
  DEBUGREF("This is the result of `DEBUGREF`");
  DEBUGFN("This is the result of `DEBUGFN`");
  DEBUGTIME("This is the result of `DEBUGTIME`");
  int a = 1, b = 2, c = 3;
  DEBUGVAL(a, b, c);
  (void)a, (void)b, (void)c;
  DEBUGVAL(log10(1000) - 2);
  DEBUGVAL(millis());
  DEBUGVAL(Serial.read());
  someFunction(42);
  DEBUG("");
  delay(5000);
}
 
int someFunction(int parameter) {
  DEBUGFN(NAMEDVALUE(parameter));
  return parameter;
}