Control Surface  1.1.1
MIDI Control Surface library for Arduino
1.AnalogReadSerial.ino

1.AnalogReadSerial

This is an example of the AnalogMultiplex class. It prints the values of all 16 inputs of a multiplexers to the serial monitor.

Boards:
AVR, AVR USB, Nano 33, Due, Teensy 3.x, ESP8266, ESP32

Connections

Optionally you can connect the enable pin as well, this is useful if you want to use multiple multiplexers with the same address lines and the same analog input. Otherwise, just connect the enable pin to ground.

If you are using a 3-bit multiplexer, like the CD74HC4051, you can uncomment the code specific to this multiplexer, and use only three address pins.

Behavior

Connect some potentiometers or other analog sensors to the 16 inputs of the multiplexer, and open the serial monitor (CTRL+SHIFT+M) or the serial plotter (CTRL+SHIFT+L). You should see all 16 signals printed or plotted.

Written by Pieter P, 31-01-2019
https://github.com/tttapa/Arduino-Helpers

#include <Arduino_Helpers.h> // Include the Arduino Helpers library
// Instantiate a multiplexer
CD74HC4067 mux = {
A0, // analog pin
{3, 4, 5, 6}, // Address pins S0, S1, S2, S3
// 7, // Optionally, specify the enable pin
};
// Alternatively, if you have a 3-bit mux:
// CD74HC4051 mux = {
// A0,
// {3, 4, 5},
// // 7, // Optional
// };
void setup() {
Serial.begin(115200);
mux.begin(); // Initialize multiplexer
}
void loop() {
for (pin_t pin = 0; pin < mux.getLength(); ++pin) {
Serial.print(mux.analogRead(pin));
Serial.print('\t');
}
Serial.println();
}
// Or if you're a cool kid, use a range-based for loop
void loop2() {
for (pin_t pin : mux.pins()) {
Serial.print(analogRead(pin));
Serial.print('\t');
}
Serial.println();
}
// Okay, it's a bit slower, because it has to look up what ExtIO device the pin
// belongs to, but hey, it's nice to have it anyway
AH::pin_t
uint16_t pin_t
The type for Arduino pins (and ExtendedIOElement pins).
Definition: Hardware-Types.hpp:17
AnalogMultiplex.hpp
AH::ExtIO::analogRead
analog_t analogRead(pin_t pin)
An ExtIO version of the Arduino function.
Definition: ExtendedInputOutput.cpp:90
Arduino_Helpers.h
Dummy header file for Arduino builder. You have to add this file first, so the other headers are in t...
AH::CD74HC4067
AnalogMultiplex< 4 > CD74HC4067
An alias for AnalogMultiplex<4> to use with CD74HC4067 analog multiplexers.
Definition: AnalogMultiplex.hpp:146