Control Surface
1.1.1
MIDI Control Surface library for Arduino
|
An example demonstrating the use of DisplayElements to display information from the DAW on a small OLED display.
Add a capacitor between the reset pin of the display and ground, and a resistor from reset to 3.3V. The values are not critical, 0.1µF and 10kΩ work fine.
You do need some way to reset the display, without it, it won't work.
Alternatively, you could use an IO pin from the Teensy to reset the display, but this just "wastes" a pin.
Map "Control Surface" as a Mackie Control Universal unit in your DAW.
Written by PieterP, 2019-11-12
https://github.com/tttapa/Control-Surface