NoteButton.ino

NoteButton

This is an example that demonstrates the use of MIDI Note Buttons that can be used for triggering samples, mute/solo/rec buttons, play/pause/stop buttons, etc. It can control almost any push button control in your DAW software.

Boards:

AVR, AVR USB, Due, Nano 33, Teensy 3.x, ESP32

Connections

• 5: momentary push button (to ground)

The internal pull-up resistor for the button will be enabled automatically.

Behavior

• When the button on pin 5 is pressed, a MIDI Note On message is sent for note C4.
• When the button on pin 5 is released, a MIDI Note Off message is sent for note C4.

Mapping

Select the Arduino as a custom MIDI controller in your DAW, and use the MIDI learn option to assign the button to a function.

Written by PieterP, 2019-08-07
https://github.com/tttapa/Control-Surface

 
#include <Control_Surface.h> // Include the Control Surface library
 
// Instantiate a MIDI over USB interface.
USBMIDI_Interface midi;
 
using namespace MIDI_Notes;
 
// Instantiate a NoteButton object
NoteButton button = {
  5,                       // Push button on pin 5
  {note(C, 4), CHANNEL_1}, // Note C4 on MIDI channel 1
};
 
void setup() {
  Control_Surface.begin(); // Initialize Control Surface
}
 
void loop() {
  Control_Surface.loop(); // Update the Control Surface
}