CCButton.ino

CCButton

This is an example that demonstrates the use of MIDI Control Change Buttons.

Boards:

AVR, AVR USB, Nano Every, Due, Nano 33 IoT, Nano 33 BLE, Pi Pico, Teensy 3.x, ESP32, ESP8266

Connections

• 5: momentary push button (to ground)

The internal pull-up resistor for the button will be enabled automatically.

Behavior

• When the button on pin 5 is pressed, a MIDI Control Change message with a value of 0x7F (127) is sent for General Purpose Controller #1.
• When the button on pin 5 is released, a MIDI Control Change message with a value of 0x00 (0) is sent for General Purpose Controller #1

Mapping

Select the Arduino as a custom MIDI controller in your DAW, and use the MIDI learn option to assign the button to a function.

Written by PieterP, 2019-09-29
https://github.com/tttapa/Control-Surface

 
#include <Control_Surface.h> // Include the Control Surface library
 
// Instantiate a MIDI over USB interface.
USBMIDI_Interface midi;
 
// Instantiate a CCButton object
CCButton button {
  // Push button on pin 5:
  5,
  // General Purpose Controller #1 on MIDI channel 1:
  {MIDI_CC::General_Purpose_Controller_1, CHANNEL_1},
};
 
void setup() {
  Control_Surface.begin(); // Initialize Control Surface
}
 
void loop() {
  Control_Surface.loop(); // Update the Control Surface
}