1.MAX7219-Blink.ino

1.MAX7219-Blink

This example demonstrates the use of MAX7219 LED outputs as if they were just normal IO pins, using digitalWrite.

Boards:

AVR, AVR USB, Nano Every, Nano 33, Due, Teensy 3.x, ESP8266, ESP32

Connections

• SS: MAX7219 CS
• MOSI: MAX7219 DIN
• SCK: MAX7219 CLK

Behavior

This sketch will blink the first and the last LEDs once a second, in an alternating pattern.

Written by PieterP, 2020-03-24
https://github.com/tttapa/Arduino-Helpers

 
#include <Arduino_Helpers.h> // Include the Arduino Helpers library.
#include <AH/Hardware/ExtendedInputOutput/MAX7219.hpp>
 
using namespace ExtIO; // Bring the ExtIO pin functions into your sketch
 
// Instantiate a MAX7219 with the SPI slave select pin as latch pin
// There's just 1 MAX7219 in the chain, if you have more of them daisy-chained
// together, you can increase the template argument (between angled brackets)
MAX7219<1> max7219 = SS;
 
const pin_t ledPin1 = max7219.pin(0);  // first LED of the MAX7219
const pin_t ledPin2 = max7219.pin(63); // last LED of the MAX7219
 
void setup() {
  max7219.begin();          // Initialize the shift registers
  pinMode(ledPin1, OUTPUT); // You don't even need this line, since
  pinMode(ledPin2, OUTPUT); // since the MAX7219's pins are always outputs
}
 
void loop() {
  // Toggle the state of the LEDs every 1/2 second
  digitalWrite(ledPin1, HIGH);
  digitalWrite(ledPin2, LOW);
  delay(500);
  digitalWrite(ledPin1, LOW);
  digitalWrite(ledPin2, HIGH);
  delay(500);
}