Program-Changer.ino

Program-Changer

This is an example that demonstrates the use of MIDI Program Changers.

Boards: 🛈

AVR, AVR USB, Nano Every, Due, Nano 33 IoT, Nano 33 BLE, UNO R4, Pi Pico, Teensy 3.x, ESP32, ESP8266

Connections

• 2: momentary push button (to ground)
• 3: momentary push button (to ground)
• 4: momentary push button (to ground)

The internal pull-up resistor for the buttons will be enabled automatically.

Behavior

• When the button on pin 2 is pressed, the MIDI Program for "Acoustic Grand Piano" is selected.
• When the button on pin 3 is pressed, the MIDI Program for "Rock Organ" is selected.
• When the button on pin 4 is pressed, the MIDI Program for "Electric Bass Pick" is selected.

Written by PieterP, 2019-08-07
https://github.com/tttapa/Control-Surface

 
#include <Control_Surface.h> // Include the Control Surface library
 
// Instantiate a MIDI over USB interface
USBMIDI_Interface midi;
 
// Instantiate a program changer with 3 programs
ProgramChanger<3> programChanger {
  {
    MIDI_PC::Acoustic_Grand_Piano, // list of programs
    MIDI_PC::Rock_Organ,
    MIDI_PC::Electric_Bass_Pick,
  },
  Channel_1, // MIDI channel to use
};
 
// Instantiate a selector that reads three buttons and controls the program
// changer
ManyButtonsSelector<3> programSelector {
  programChanger,
  {{2, 3, 4}},
};
 
// The library comes with many different Selectors, like rotary encoders,
// push buttons that increment or decrement the setting, versions with LEDs
// to display the current setting, etc.
// https://tttapa.github.io/Control-Surface/Doxygen/d0/d0c/group__Selectors.html
 
void setup() {
  Control_Surface.begin(); // Initialize Control Surface
}
 
void loop() {
  Control_Surface.loop(); // Update the Control Surface
}