LCOV - code coverage report
Current view: top level - src/MIDI_Outputs/Bankable - NoteButton.hpp (source / functions) Hit Total Coverage
Test: 19d2efc7037c2e176feca44750a12594c76f466f Lines: 7 7 100.0 %
Date: 2019-11-24 14:50:27 Functions: 2 3 66.7 %
Legend: Lines: hit not hit

          Line data    Source code
       1             : #pragma once
       2             : 
       3             : #include <Banks/BankAddresses.hpp>
       4             : #include <MIDI_Outputs/Bankable/Abstract/MIDIButton.hpp>
       5             : #include <MIDI_Senders/DigitalNoteSender.hpp>
       6             : 
       7             : BEGIN_CS_NAMESPACE
       8             : 
       9             : namespace Bankable {
      10             : 
      11             : /**
      12             :  * @brief   A class of MIDIOutputElement%s that read the input of a **momentary
      13             :  *          push button or switch**, and send out MIDI **Note** events.
      14             :  * 
      15             :  * A Note On event is sent when the button is pressed, and a Note Off
      16             :  * event is sent when the button is released.  
      17             :  * The button is debounced in software.  
      18             :  * This version can be banked.  
      19             :  *
      20             :  * @ingroup BankableMIDIOutputElements
      21             :  */
      22           4 : class NoteButton : public MIDIButton<SingleAddress, DigitalNoteSender> {
      23             :   public:
      24             :     /**
      25             :      * @brief   Create a new Bankable NoteButton object with the given pin, note
      26             :      *          number and channel.
      27             :      * 
      28             :      * @param   config
      29             :      *          The bank configuration to use: the bank to add this element to,
      30             :      *          and whether to change the address, channel or cable number.
      31             :      * @param   pin
      32             :      *          The digital input pin to read from.  
      33             :      *          The internal pull-up resistor will be enabled.
      34             :      * @param   address
      35             :      *          The MIDI address containing the note number [0, 127], 
      36             :      *          channel [CHANNEL_1, CHANNEL_16], and optional cable number 
      37             :      *          [0, 15].
      38             :      * @param   velocity
      39             :      *          The velocity of the MIDI Note events.
      40             :      */
      41           4 :     NoteButton(const OutputBankConfig &config, pin_t pin,
      42             :                const MIDICNChannelAddress &address, uint8_t velocity = 0x7F)
      43           4 :         : MIDIButton<SingleAddress, DigitalNoteSender>{
      44           4 :               {config, address},
      45           4 :               pin,
      46           4 :               {velocity},
      47           8 :           } {}
      48             : 
      49             :     /// Set the velocity of the MIDI Note events.
      50             :     void setVelocity(uint8_t velocity) { this->sender.setVelocity(velocity); }
      51             :     /// Get the velocity of the MIDI Note events.
      52             :     uint8_t getVelocity() const { return this->sender.getVelocity(); }
      53             : };
      54             : 
      55             : } // namespace Bankable
      56             : 
      57             : END_CS_NAMESPACE

Generated by: LCOV version 1.14-5-g4ff2ed6