Control Surface pin-t-adl
MIDI Control Surface library for Arduino
MIDI_Sender.ipp
Go to the documentation of this file.
1#include "MIDI_Sender.hpp"
3
5
6template <class Derived>
8 uint8_t d1, uint8_t d2,
9 Cable cable) {
10 send(ChannelMessage(m, c, d1, d2, cable));
11}
12
13template <class Derived>
15 uint8_t d1, Cable cable) {
16 send(ChannelMessage(m, c, d1, 0, cable));
18
19template <class Derived>
20void MIDI_Sender<Derived>::sendNoteOn(MIDIAddress address, uint8_t velocity) {
21 if (address)
22 CRTP(Derived).sendChannelMessageImpl({
24 address.getChannel(),
25 address.getAddress(),
26 uint8_t(velocity & 0x7F),
27 address.getCableNumber(),
28 });
29}
30template <class Derived>
31void MIDI_Sender<Derived>::sendNoteOff(MIDIAddress address, uint8_t velocity) {
32 if (address)
33 CRTP(Derived).sendChannelMessageImpl({
35 address.getChannel(),
36 address.getAddress(),
37 uint8_t(velocity & 0x7F),
38 address.getCableNumber(),
39 });
40}
41template <class Derived>
43 uint8_t pressure) {
44 if (address)
45 CRTP(Derived).sendChannelMessageImpl({
47 address.getChannel(),
48 address.getAddress(),
49 uint8_t(pressure & 0x7F),
50 address.getCableNumber(),
51 });
53template <class Derived>
55 uint8_t value) {
56 if (address)
57 CRTP(Derived).sendChannelMessageImpl({
59 address.getChannel(),
60 address.getAddress(),
61 uint8_t(value & 0x7F),
62 address.getCableNumber(),
63 });
65template <class Derived>
67 uint8_t value) {
68 if (address)
69 CRTP(Derived).sendChannelMessageImpl({
71 address.getChannel(),
72 uint8_t(value & 0x7F),
73 uint8_t(0x00),
74 address.getCableNumber(),
75 });
77template <class Derived>
79 if (address)
80 CRTP(Derived).sendChannelMessageImpl({
82 address.getChannel(),
83 address.getAddress(),
84 uint8_t(0x00),
85 address.getCableNumber(),
86 });
87}
88template <class Derived>
90 uint8_t pressure) {
91 if (address)
92 CRTP(Derived).sendChannelMessageImpl({
94 address.getChannel(),
95 uint8_t(pressure & 0x7F),
96 uint8_t(0x00),
97 address.getCableNumber(),
98 });
99}
100template <class Derived>
102 uint16_t value) {
103 if (address)
104 CRTP(Derived).sendChannelMessageImpl({
106 address.getChannel(),
107 uint8_t((value >> 0) & 0x7F),
108 uint8_t((value >> 7) & 0x7F),
109 address.getCableNumber(),
110 });
111}
112template <class Derived>
114 if (message.length > 0)
115 CRTP(Derived).sendSysExImpl(message);
117
118template <class Derived>
120 if (message.isValid())
121 CRTP(Derived).sendRealTimeImpl(message);
122}
124template <class Derived>
126 if (message.hasValidChannelMessageHeader()) {
127 message.sanitize();
128 CRTP(Derived).sendChannelMessageImpl(message);
130}
132template <class Derived>
134 if (message.hasValidSystemCommonHeader()) {
135 message.sanitize();
136 CRTP(Derived).sendSysCommonImpl(message);
137 }
138}
139
140template <class Derived>
141template <uint16_t N>
142void MIDI_Sender<Derived>::sendSysEx(const uint8_t (&sysexdata)[N],
143 Cable cable) {
144 send(SysExMessage(sysexdata, N, cable));
145}
146template <class Derived>
147void MIDI_Sender<Derived>::sendSysEx(const uint8_t *data, uint16_t length,
148 Cable cable) {
149 send(SysExMessage(data, length, cable));
150}
151
152template <class Derived>
154 send(SysCommonMessage(m, cable));
155}
156template <class Derived>
158 Cable cable) {
159 send(SysCommonMessage(m, data1, cable));
161template <class Derived>
163 uint8_t data2, Cable cable) {
164 send(SysCommonMessage(m, data1, data2, cable));
165}
166
167template <class Derived>
170}
171template <class Derived>
173 uint8_t values, Cable cable) {
174 sendMTCQuarterFrame((messageType << 4) | values, cable);
175}
176template <class Derived>
179 msg.setData14bit(spp);
180 send(msg);
181}
182template <class Derived>
185}
186template <class Derived>
189}
190
191template <class Derived>
193 send(RealTimeMessage(rt, cable));
194}
195template <class Derived>
197 send(RealTimeMessage(rt, cable));
198}
199
200template <class Derived>
202 sendRealTime(MIDIMessageType::TIMING_CLOCK, cable);
203}
204template <class Derived>
206 sendRealTime(MIDIMessageType::START, cable);
207}
208template <class Derived>
210 sendRealTime(MIDIMessageType::CONTINUE, cable);
211}
212template <class Derived>
214 sendRealTime(MIDIMessageType::STOP, cable);
215}
216template <class Derived>
218 sendRealTime(MIDIMessageType::ACTIVE_SENSING, cable);
219}
220template <class Derived>
222 sendRealTime(MIDIMessageType::SYSTEM_RESET, cable);
223}
224
225template <class Derived>
227 CRTP(Derived).sendNowImpl();
228}
229
230template <class Derived>
231void MIDI_Sender<Derived>::sendKP(MIDIAddress address, uint8_t pressure) {
232 sendKeyPressure(address, pressure);
233}
234template <class Derived>
235void MIDI_Sender<Derived>::sendCC(MIDIAddress address, uint8_t value) {
236 sendControlChange(address, value);
237}
238template <class Derived>
240 sendProgramChange(address);
241}
242template <class Derived>
243void MIDI_Sender<Derived>::sendPC(MIDIChannelCable address, uint8_t value) {
244 sendProgramChange(address, value);
245}
246template <class Derived>
247void MIDI_Sender<Derived>::sendCP(MIDIChannelCable address, uint8_t pressure) {
248 sendChannelPressure(address, pressure);
249}
250template <class Derived>
251void MIDI_Sender<Derived>::sendPB(MIDIChannelCable address, uint16_t value) {
252 sendPitchBend(address, value);
253}
254
#define CRTP(Derived)
Helper for the Curiously Recurring Template Pattern.
Definition: CRTP.hpp:4
MIDIMessageType
All possible MIDI status byte values (without channel).
#define END_CS_NAMESPACE
#define BEGIN_CS_NAMESPACE
A type-safe class for MIDI USB Cable numbers.
Definition: Cable.hpp:13
A type-safe class for MIDI channels.
Definition: Channel.hpp:13
A type-safe utility class for saving a MIDI address consisting of a 7-bit address,...
constexpr uint8_t getAddress() const
Get the address [0, 127].
constexpr Channel getChannel() const
Get the channel [CHANNEL_1, CHANNEL_16].
constexpr Cable getCableNumber() const
Get the cable number [CABLE_1, CABLE_16].
A class for saving a MIDI channel and cable number.
Definition: MIDIAddress.hpp:24
constexpr Channel getChannel() const
Get the channel [1, 16].
Definition: MIDIAddress.hpp:44
constexpr Cable getCableNumber() const
Get the cable number [CABLE_1, CABLE_16].
Definition: MIDIAddress.hpp:49
void sendNow()
Causes all buffered messages to be sent immediately.
void sendSysEx(const uint8_t(&sysexdata)[N], Cable cable=CABLE_1)
Send a MIDI System Exclusive message.
void sendChannelPressure(MIDIChannelCable address, uint8_t pressure)
Send a MIDI Channel Pressure event.
Definition: MIDI_Sender.ipp:89
void sendPB(MIDIChannelCable address, uint16_t value)
Send a MIDI Pitch Bend event.
void sendStart(Cable cable=CABLE_1)
Send a MIDI Start message.
void sendRealTime(MIDIMessageType rt, Cable cable=CABLE_1)
Send a MIDI Real-Time message.
void sendChannelMessage(MIDIMessageType m, Channel c, uint8_t d1, uint8_t d2, Cable cable=CABLE_1)
Send a 3-byte MIDI Channel Voice message.
Definition: MIDI_Sender.ipp:7
void sendKP(MIDIAddress address, uint8_t pressure)
Send a MIDI Key Pressure event.
void sendMTCQuarterFrame(uint8_t data, Cable cable=CABLE_1)
Send a MIDI Time Code Quarter Frame.
void sendSysCommon(MIDIMessageType m, Cable cable=CABLE_1)
Send a MIDI System Common message.
void sendProgramChange(MIDIAddress address)
Send a MIDI Program Change event.
Definition: MIDI_Sender.ipp:78
void sendSystemReset(Cable cable=CABLE_1)
Send a MIDI System Reset message.
void send(ChannelMessage message)
Send a MIDI Channel Voice message.
void sendCP(MIDIChannelCable address, uint8_t pressure)
Send a MIDI Channel Pressure event.
void sendActiveSensing(Cable cable=CABLE_1)
Send a MIDI Active Sensing message.
void sendCC(MIDIAddress address, uint8_t value)
Send a MIDI Control Change event.
void sendStop(Cable cable=CABLE_1)
Send a MIDI Stop message.
void sendKeyPressure(MIDIAddress address, uint8_t pressure)
Send a MIDI Key Pressure event.
Definition: MIDI_Sender.ipp:42
void sendControlChange(MIDIAddress address, uint8_t value)
Send a MIDI Control Change event.
Definition: MIDI_Sender.ipp:54
void sendSongPositionPointer(uint16_t spp, Cable cable=CABLE_1)
Send a MIDI Song Position Pointer message.
void sendSongSelect(uint8_t song, Cable cable=CABLE_1)
Send a MIDI Song Select message.
void sendPC(MIDIAddress address)
Send a MIDI Program Change event.
void sendNoteOn(MIDIAddress address, uint8_t velocity)
Send a MIDI Note On event.
Definition: MIDI_Sender.ipp:20
void sendNoteOff(MIDIAddress address, uint8_t velocity)
Send a MIDI Note Off event.
Definition: MIDI_Sender.ipp:31
void sendTuneRequest(Cable cable=CABLE_1)
Send a MIDI Tune Request.
void sendTimingClock(Cable cable=CABLE_1)
Send a MIDI Timing Clock message.
void sendPitchBend(MIDIChannelCable address, uint16_t value)
Send a MIDI Pitch Bend event.
void sendContinue(Cable cable=CABLE_1)
Send a MIDI Continue message.
bool hasValidChannelMessageHeader() const
Check whether the header is a valid header for a channel message.
void sanitize()
Make sure that the status byte has the most significant bit set and the data bytes have the most sign...
void setData14bit(uint16_t data)
If Data 1 and Data 2 represent a single 14-bit number, you can use this method to set that number.
bool hasValidSystemCommonHeader() const
Check whether the header is a valid header for a System Common message.
bool isValid() const
Check whether the header is a valid header for a Real-Time message.