#include <MIDI_Outputs/Bankable/PBSmartPotentiometer.hpp>

Detailed Description

template<uint8_t NumBanks>
class Bankable::PBSmartPotentiometer< NumBanks >

A class of MIDIOutputElements that read the analog input from a potentiometer or fader, and send out 14-bit MIDI Pitch Bend events.

The analog input is filtered and hysteresis is applied for maximum stability.
The actual precision is "only" 10 bits, because this is the resolution of the built-in ADC, and this is the default resolution used by the Mackie Control Universal protocol.

This version can be banked, and when changing banks, it disables the potentiometer until you move it to the position where it was last time the current bank was active. This prevents the values changing when changing banks.

Template Parameters

NumBanks The number of banks.

Definition at line 35 of file PBSmartPotentiometer.hpp.

Inheritance diagram for PBSmartPotentiometer< NumBanks >:

Collaboration diagram for PBSmartPotentiometer< NumBanks >:

Enabling and disabling updatables
void	enable ()
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

void	disable ()
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

bool	isEnabled () const
	Check if this updatable is enabled. More...

void	moveDown ()
	Move down this element in the list. More...

static void	enable (UpdatableCRTP *element)
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	enable (UpdatableCRTP &element)
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	enable (U(&array)[N])
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	disable (UpdatableCRTP *element)
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

static void	disable (UpdatableCRTP &element)
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

static void	disable (U(&array)[N])
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

Main initialization and updating methods
static void	beginAll ()
	Begin all enabled instances of this class. More...

static void	updateAll ()
	Update all enabled instances of this class. More...

Public Types
enum	State
	State of the smart potentiometer. More...

Public Member Functions
	PBSmartPotentiometer (BankConfig< NumBanks > config, pin_t analogPin, MIDIChannelCable address)
	Create a new Bankable PBSmartPotentiometer object with the given analog pin and channel. More...

void	begin () override
	Initialize this updatable. More...

void	update () override
	Update this updatable. More...

State	getState () const
	Get the state of the smart potentiometer, to know whether the position has to be lower or higher in order to activate it. More...

void	activate ()
	Activate the potentiometer in the current bank, regardless of its current and previous position. More...

void	map (MappingFunction fn)
	Specify a mapping function that is applied to the raw analog value before sending. More...

void	invert ()
	Invert the analog value. More...

analog_t	getRawValue () const
	Get the raw value of the analog input (this is the value without applying the filter or the mapping function first). More...

analog_t	getValue () const
	Get the value of the analog input (this is the value after first applying the mapping function). More...

analog_t	getPreviousValue (setting_t bank) const
	Get the previous value of the analog input of the given bank. More...

analog_t	getPreviousValue () const
	Get the previous value of the analog input of the active bank. More...

Public Attributes
PitchBendSender< 10 >	sender

Protected Attributes
SingleAddress	address

AH::FilteredAnalog< Sender::precision()>	filteredAnalog

AH::Array< analog_t, NumBanks >	previousValues

State	state

setting_t	previousBank

Updatable< NormalUpdatable > *	next

Updatable< NormalUpdatable > *	previous

Static Protected Attributes
static constexpr analog_t	initial

static DoublyLinkedList< Updatable< NormalUpdatable > >	updatables

Member Enumeration Documentation

◆ State

enum State

inherited

State of the smart potentiometer.

Definition at line 47 of file SmartMIDIFilteredAnalog.hpp.

Constructor & Destructor Documentation

◆ PBSmartPotentiometer()

PBSmartPotentiometer	(	BankConfig< NumBanks >	config,
		pin_t	analogPin,
		MIDIChannelCable	address
	)

inline

Create a new Bankable PBSmartPotentiometer object with the given analog pin and channel.

Parameters

config	The bank configuration to use: the bank to add this element to, and whether to the channel or cable number.
analogPin	The analog input pin to read from.
address	The MIDI address containing the channel [CHANNEL_1, CHANNEL_16], and optional cable number [CABLE_1, CABLE_16].

Definition at line 52 of file PBSmartPotentiometer.hpp.

Member Function Documentation

◆ begin()

void begin ( )

inlineoverridevirtualinherited

Initialize this updatable.

Implements Updatable< T >.

Definition at line 61 of file SmartMIDIFilteredAnalog.hpp.

◆ update()

void update ( )

inlineoverridevirtualinherited

Update this updatable.

Implements Updatable< T >.

Definition at line 68 of file SmartMIDIFilteredAnalog.hpp.

◆ getState()

State getState ( ) const

inlineinherited

Get the state of the smart potentiometer, to know whether the position has to be lower or higher in order to activate it.

Definition at line 99 of file SmartMIDIFilteredAnalog.hpp.

◆ activate()

void activate ( )

inlineinherited

Activate the potentiometer in the current bank, regardless of its current and previous position.

Definition at line 105 of file SmartMIDIFilteredAnalog.hpp.

◆ map()

void map ( MappingFunction fn )

inlineinherited

Specify a mapping function that is applied to the raw analog value before sending.

Parameters

fn	A function pointer to the mapping function. This function should take the filtered analog value of \( 16 - \mathrm{ANALOG\_FILTER\_SHIFT\_FACTOR} \) bits as a parameter, and should return a value in the same range.

See also: FilteredAnalog::map

Definition at line 119 of file SmartMIDIFilteredAnalog.hpp.

◆ invert()

void invert ( )

inlineinherited

Invert the analog value.

Definition at line 122 of file SmartMIDIFilteredAnalog.hpp.

◆ getRawValue()

analog_t getRawValue ( ) const

inlineinherited

Get the raw value of the analog input (this is the value without applying the filter or the mapping function first).

Definition at line 128 of file SmartMIDIFilteredAnalog.hpp.

◆ getValue()

analog_t getValue ( ) const

inlineinherited

Get the value of the analog input (this is the value after first applying the mapping function).

Definition at line 134 of file SmartMIDIFilteredAnalog.hpp.

◆ getPreviousValue() [1/2]

analog_t getPreviousValue ( setting_t bank ) const

inlineinherited

Get the previous value of the analog input of the given bank.

Definition at line 139 of file SmartMIDIFilteredAnalog.hpp.

◆ getPreviousValue() [2/2]

analog_t getPreviousValue ( ) const

inlineinherited

Get the previous value of the analog input of the active bank.

Definition at line 146 of file SmartMIDIFilteredAnalog.hpp.

◆ beginAll()

static void beginAll ( )

inlinestaticinherited

Begin all enabled instances of this class.

See also: begin()

Definition at line 186 of file Updatable.hpp.

◆ updateAll()

static void updateAll ( )

inlinestaticinherited

Update all enabled instances of this class.

See also: update()

Definition at line 190 of file Updatable.hpp.

◆ enable() [1/4]

void enable ( )

inlineinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 100 of file Updatable.hpp.

◆ enable() [2/4]

static void enable ( UpdatableCRTP< Updatable< NormalUpdatable > > * element )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 129 of file Updatable.hpp.

◆ enable() [3/4]

static void enable ( UpdatableCRTP< Updatable< NormalUpdatable > > & element )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 131 of file Updatable.hpp.

◆ enable() [4/4]

static void enable ( U(&) array[N] )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 134 of file Updatable.hpp.

◆ disable() [1/4]

void disable ( )

inlineinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 110 of file Updatable.hpp.

◆ disable() [2/4]

static void disable ( UpdatableCRTP< Updatable< NormalUpdatable > > * element )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 140 of file Updatable.hpp.

◆ disable() [3/4]

static void disable ( UpdatableCRTP< Updatable< NormalUpdatable > > & element )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 142 of file Updatable.hpp.

◆ disable() [4/4]

static void disable ( U(&) array[N] )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 145 of file Updatable.hpp.

◆ isEnabled()

bool isEnabled ( ) const

inlineinherited

Check if this updatable is enabled.

Note: Assumes that the updatable is not added to a different linked list by the user.

Definition at line 124 of file Updatable.hpp.

◆ moveDown()

void moveDown ( )

inlineinherited

Move down this element in the list.

Definition at line 151 of file Updatable.hpp.

Member Data Documentation

◆ address

SingleAddress address

protectedinherited

Definition at line 151 of file SmartMIDIFilteredAnalog.hpp.

◆ filteredAnalog

AH::FilteredAnalog<Sender::precision()> filteredAnalog

protectedinherited

Definition at line 152 of file SmartMIDIFilteredAnalog.hpp.

◆ initial

constexpr analog_t initial

staticconstexprprotectedinherited

Definition at line 157 of file SmartMIDIFilteredAnalog.hpp.

◆ previousValues

AH::Array<analog_t, NumBanks> previousValues

protectedinherited

Definition at line 158 of file SmartMIDIFilteredAnalog.hpp.

◆ state

State state

protectedinherited

Definition at line 159 of file SmartMIDIFilteredAnalog.hpp.

◆ previousBank

setting_t previousBank

protectedinherited

Definition at line 160 of file SmartMIDIFilteredAnalog.hpp.

◆ sender

PitchBendSender< 10 > sender

inherited

Definition at line 163 of file SmartMIDIFilteredAnalog.hpp.

◆ updatables

DoublyLinkedList< Updatable< NormalUpdatable > > updatables

staticprotectedinherited

Definition at line 156 of file Updatable.hpp.

◆ next

Updatable< NormalUpdatable > * next

protectedinherited

Definition at line 324 of file LinkedList.hpp.

◆ previous

Updatable< NormalUpdatable > * previous

protectedinherited

Definition at line 325 of file LinkedList.hpp.

The documentation for this class was generated from the following file:

PBSmartPotentiometer.hpp

Detailed Description

Enabling and disabling updatables

Main initialization and updating methods

Public Types

Public Member Functions

Public Attributes

Protected Attributes

Static Protected Attributes

Member Enumeration Documentation

◆ State

Constructor & Destructor Documentation

◆ PBSmartPotentiometer()

Member Function Documentation

◆ begin()

◆ update()

◆ getState()

◆ activate()

◆ map()

◆ invert()

◆ getRawValue()

◆ getValue()

◆ getPreviousValue() [1/2]

◆ getPreviousValue() [2/2]

◆ beginAll()

◆ updateAll()

◆ enable() [1/4]

◆ enable() [2/4]

◆ enable() [3/4]

◆ enable() [4/4]

◆ disable() [1/4]

◆ disable() [2/4]

◆ disable() [3/4]

◆ disable() [4/4]

◆ isEnabled()

◆ moveDown()

Member Data Documentation

◆ address

◆ filteredAnalog

◆ initial

◆ previousValues

◆ state

◆ previousBank

◆ sender

◆ updatables

◆ next

◆ previous