Control Surface
pin-t-adl
MIDI Control Surface library for Arduino
|
All MIDIInputElements that visualize their state using LEDs.
Modules | |
Bankable MIDI Input Elements LEDs | |
All Bankable MIDIInputElements that visualize their state using LEDs. | |
Classes | |
class | VPotRingLEDs |
A MIDI input element that represents a Mackie Control Universal VPot ring and displays it using LEDs. More... | |
class | VULEDs< NumLEDs > |
A MIDI input element that represents a Mackie Control Universal VU meter and displays its value using LEDs. More... | |
Typedefs | |
using | NoteLED = NoteCCKPLED< MIDIMessageType::NOTE_ON > |
Class that listens for MIDI Note events on a single address and turns on an LED when the value is higher than a threshold. More... | |
using | CCLED = NoteCCKPLED< MIDIMessageType::CONTROL_CHANGE > |
Class that listens for MIDI Control Change events on a single address and turns on an LED when the value is higher than a threshold. More... | |
using | KPLED = NoteCCKPLED< MIDIMessageType::KEY_PRESSURE > |
Class that listens for MIDI Key Pressure events on a single address and turns on an LED when the value is higher than a threshold. More... | |
template<uint8_t NumLEDs> | |
using | NoteLEDBar = NoteCCKPLEDBar< MIDIMessageType::NOTE_ON, NumLEDs > |
Class that listens for Note events and displays the velocity on an LED Bar Graph, turning on a different number of LEDs depending on the velocity. More... | |
template<uint8_t NumLEDs> | |
using | CCLEDBar = NoteCCKPLEDBar< MIDIMessageType::CONTROL_CHANGE, NumLEDs > |
Class that listens for Control Change events and displays the value on an LED Bar Graph, turning on a different number of LEDs depending on the value. More... | |
template<uint8_t NumLEDs> | |
using | KPLEDBar = NoteCCKPLEDBar< MIDIMessageType::KEY_PRESSURE, NumLEDs > |
Class that listens for Key Pressure events and displays the pressure on an LED Bar Graph, turning on a different number of LEDs depending on the value. More... | |
using | NoteLEDPWM = NoteCCKPLEDPWM< MIDIMessageType::NOTE_ON > |
Class that listens for MIDI Note events on a single address and turns on an LED with a brightness/duty cycle proportional to the velocity. More... | |
using | CCLEDPWM = NoteCCKPLEDPWM< MIDIMessageType::CONTROL_CHANGE > |
Class that listens for MIDI Control Change events on a single address and turns on an LED with a brightness/duty cycle proportional to the value. More... | |
using | KPLEDPWM = NoteCCKPLEDPWM< MIDIMessageType::KEY_PRESSURE > |
Class that listens for MIDI Key Pressure events on a single address and turns on an LED with a brightness/duty cycle proportional to the pressure. More... | |
template<uint8_t RangeLen, class ColorMapper = DefaultColorMapper> | |
using | NoteRangeFastLED = NoteCCKPRangeFastLED< MIDIMessageType::NOTE_ON, RangeLen, ColorMapper > |
MIDI Input Element that listens for MIDI Note messages in a given range, and displays their values using a FastLED LED strip. More... | |
template<class ColorMapper = DefaultColorMapper> | |
using | NoteValueFastLED = NoteCCKPRangeFastLED< MIDIMessageType::NOTE_ON, 1, ColorMapper > |
MIDI Input Element that listens for MIDI Note messages on a specific note, and displays its value using a FastLED LED strip. More... | |
template<uint8_t RangeLen, class ColorMapper = DefaultColorMapper> | |
using | CCRangeFastLED = NoteCCKPRangeFastLED< MIDIMessageType::CONTROL_CHANGE, RangeLen, ColorMapper > |
MIDI Input Element that listens for MIDI Control Change messages in a given range, and displays their values using a FastLED LED strip. More... | |
template<class ColorMapper = DefaultColorMapper> | |
using | CCValueFastLED = NoteCCKPRangeFastLED< MIDIMessageType::CONTROL_CHANGE, 1, ColorMapper > |
MIDI Input Element that listens for MIDI Control Change messages on a specific controller, and displays its value using a FastLED LED strip. More... | |
template<uint8_t RangeLen, class ColorMapper = DefaultColorMapper> | |
using | KPRangeFastLED = NoteCCKPRangeFastLED< MIDIMessageType::KEY_PRESSURE, RangeLen, ColorMapper > |
MIDI Input Element that listens for MIDI Key Pressure messages in a given range, and displays their values using a FastLED LED strip. More... | |
template<class ColorMapper = DefaultColorMapper> | |
using | KPValueFastLED = NoteCCKPRangeFastLED< MIDIMessageType::KEY_PRESSURE, 1, ColorMapper > |
MIDI Input Element that listens for MIDI Key Pressure messages on a specific note, and displays its value using a FastLED LED strip. More... | |
template<uint8_t RangeLen> | |
using | NoteRangeLEDs = NoteCCKPRangeLEDs< MIDIMessageType::NOTE_ON, RangeLen > |
Class that listens for MIDI Note events on a range of addresses and turns on the corresponding LED when the velocity is higher than a threshold. More... | |
template<uint8_t RangeLen> | |
using | CCRangeLEDs = NoteCCKPRangeLEDs< MIDIMessageType::CONTROL_CHANGE, RangeLen > |
Class that listens for MIDI Control Change events on a range of addresses and turns on the corresponding LED when the value is higher than a threshold. More... | |
template<uint8_t RangeLen> | |
using | KPRangeLEDs = NoteCCKPRangeLEDs< MIDIMessageType::KEY_PRESSURE, RangeLen > |
Class that listens for MIDI Key Pressure events on a range of addresses and turns on the corresponding LED when the pressure is higher than a threshold. More... | |
using NoteLED = NoteCCKPLED<MIDIMessageType::NOTE_ON> |
Class that listens for MIDI Note events on a single address and turns on an LED when the value is higher than a threshold.
Definition at line 61 of file NoteCCKPLED.hpp.
Class that listens for MIDI Control Change events on a single address and turns on an LED when the value is higher than a threshold.
Definition at line 66 of file NoteCCKPLED.hpp.
Class that listens for MIDI Key Pressure events on a single address and turns on an LED when the value is higher than a threshold.
Definition at line 71 of file NoteCCKPLED.hpp.
using NoteLEDBar = NoteCCKPLEDBar<MIDIMessageType::NOTE_ON, NumLEDs> |
Class that listens for Note events and displays the velocity on an LED Bar Graph, turning on a different number of LEDs depending on the velocity.
Similar to a digital LED VU meter. Can be configured in either bar or dot mode.
NumLEDs | The number of LEDs the display has. |
Definition at line 68 of file NoteCCKPLEDBar.hpp.
using CCLEDBar = NoteCCKPLEDBar<MIDIMessageType::CONTROL_CHANGE, NumLEDs> |
Class that listens for Control Change events and displays the value on an LED Bar Graph, turning on a different number of LEDs depending on the value.
Similar to a digital LED VU meter. Can be configured in either bar or dot mode.
NumLEDs | The number of LEDs the display has. |
Definition at line 78 of file NoteCCKPLEDBar.hpp.
using KPLEDBar = NoteCCKPLEDBar<MIDIMessageType::KEY_PRESSURE, NumLEDs> |
Class that listens for Key Pressure events and displays the pressure on an LED Bar Graph, turning on a different number of LEDs depending on the value.
Similar to a digital LED VU meter. Can be configured in either bar or dot mode.
NumLEDs | The number of LEDs the display has. |
Definition at line 88 of file NoteCCKPLEDBar.hpp.
Class that listens for MIDI Note events on a single address and turns on an LED with a brightness/duty cycle proportional to the velocity.
Definition at line 57 of file NoteCCKPLEDPWM.hpp.
Class that listens for MIDI Control Change events on a single address and turns on an LED with a brightness/duty cycle proportional to the value.
Definition at line 62 of file NoteCCKPLEDPWM.hpp.
Class that listens for MIDI Key Pressure events on a single address and turns on an LED with a brightness/duty cycle proportional to the pressure.
Definition at line 67 of file NoteCCKPLEDPWM.hpp.
using NoteRangeFastLED = NoteCCKPRangeFastLED<MIDIMessageType::NOTE_ON, RangeLen, ColorMapper> |
MIDI Input Element that listens for MIDI Note messages in a given range, and displays their values using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
RangeLen | The length of the range of MIDI note numbers to listen for. |
ColorMapper | The color mapper that defines how each MIDI velocity value should be mapped to an RGB color for the LEDs. |
Definition at line 203 of file NoteCCKPRangeFastLED.hpp.
using NoteValueFastLED = NoteCCKPRangeFastLED<MIDIMessageType::NOTE_ON, 1, ColorMapper> |
MIDI Input Element that listens for MIDI Note messages on a specific note, and displays its value using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
ColorMapper | The color mapper that defines how each MIDI velocity value should be mapped to an RGB color for the LEDs. |
Definition at line 221 of file NoteCCKPRangeFastLED.hpp.
using CCRangeFastLED = NoteCCKPRangeFastLED<MIDIMessageType::CONTROL_CHANGE, RangeLen, ColorMapper> |
MIDI Input Element that listens for MIDI Control Change messages in a given range, and displays their values using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
RangeLen | The length of the range of MIDI note numbers to listen for. |
ColorMapper | The color mapper that defines how each MIDI control change value should be mapped to an RGB color for the LEDs. |
Definition at line 241 of file NoteCCKPRangeFastLED.hpp.
using CCValueFastLED = NoteCCKPRangeFastLED<MIDIMessageType::CONTROL_CHANGE, 1, ColorMapper> |
MIDI Input Element that listens for MIDI Control Change messages on a specific controller, and displays its value using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
ColorMapper | The color mapper that defines how each MIDI control change value should be mapped to an RGB color for the LEDs. |
Definition at line 260 of file NoteCCKPRangeFastLED.hpp.
using KPRangeFastLED = NoteCCKPRangeFastLED<MIDIMessageType::KEY_PRESSURE, RangeLen, ColorMapper> |
MIDI Input Element that listens for MIDI Key Pressure messages in a given range, and displays their values using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
RangeLen | The length of the range of MIDI note numbers to listen for. |
ColorMapper | The color mapper that defines how each MIDI pressure value should be mapped to an RGB color for the LEDs. |
Definition at line 280 of file NoteCCKPRangeFastLED.hpp.
using KPValueFastLED = NoteCCKPRangeFastLED<MIDIMessageType::KEY_PRESSURE, 1, ColorMapper> |
MIDI Input Element that listens for MIDI Key Pressure messages on a specific note, and displays its value using a FastLED LED strip.
This class doesn't actually write to the LEDs directly, it writes to a buffer of CRGB values that is sent to the LEDs by the FastLED library in the user code. To know when to update the LEDs, you can use the NoteCCKPRangeFastLED::getDirty() and NoteCCKPRangeFastLED::clearDirty() methods.
ColorMapper | The color mapper that defines how each MIDI pressure value should be mapped to an RGB color for the LEDs. |
Definition at line 298 of file NoteCCKPRangeFastLED.hpp.
using NoteRangeLEDs = NoteCCKPRangeLEDs<MIDIMessageType::NOTE_ON, RangeLen> |
Class that listens for MIDI Note events on a range of addresses and turns on the corresponding LED when the velocity is higher than a threshold.
Definition at line 71 of file NoteCCKPRangeLEDs.hpp.
using CCRangeLEDs = NoteCCKPRangeLEDs<MIDIMessageType::CONTROL_CHANGE, RangeLen> |
Class that listens for MIDI Control Change events on a range of addresses and turns on the corresponding LED when the value is higher than a threshold.
Definition at line 77 of file NoteCCKPRangeLEDs.hpp.
using KPRangeLEDs = NoteCCKPRangeLEDs<MIDIMessageType::KEY_PRESSURE, RangeLen> |
Class that listens for MIDI Key Pressure events on a range of addresses and turns on the corresponding LED when the pressure is higher than a threshold.
Definition at line 83 of file NoteCCKPRangeLEDs.hpp.