#include <MIDI_Outputs/ManyAddresses/PBPotentiometer.hpp>

Detailed Description

template<setting_t NumBanks>
class Bankable::ManyAddresses::PBPotentiometer< NumBanks >

A class of MIDIOutputElements that read the analog input from a potentiometer or fader, and send out 14-bit MIDI Pitch Bend events.

The analog input is filtered and hysteresis is applied for maximum stability.
The actual precision is "only" 10 bits, because this is the resolution of the built-in ADC, and this is the default resolution used by the Mackie Control Universal protocol.
This version can be banked using an arbitrary list of alternative addresses.

Template Parameters

NumBanks The number of variants/alternative addresses the element has.

Examples: One-Pot-Both-PB-and-CC.ino.

Definition at line 35 of file ManyAddresses/PBPotentiometer.hpp.

Inheritance diagram for PBPotentiometer< NumBanks >:

Collaboration diagram for PBPotentiometer< NumBanks >:

Enabling and disabling updatables
void	enable ()
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

void	disable ()
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

bool	isEnabled () const
	Check if this updatable is enabled. More...

void	moveDown ()
	Move down this element in the list. More...

static void	enable (UpdatableCRTP *element)
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	enable (UpdatableCRTP &element)
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	enable (U(&array)[N])
	Enable this updatable: insert it into the linked list of instances, so it gets updated automatically. More...

static void	disable (UpdatableCRTP *element)
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

static void	disable (UpdatableCRTP &element)
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

static void	disable (U(&array)[N])
	Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically. More...

Main initialization and updating methods
static void	beginAll ()
	Begin all enabled instances of this class. More...

static void	updateAll ()
	Update all enabled instances of this class. More...

Public Member Functions
	PBPotentiometer (const Bank< NumBanks > &bank, pin_t analogPin, const Array< MIDIChannelCable, NumBanks > &addresses)
	Create a new Bankable PBPotentiometer object with the given analog pin and channel. More...

void	begin () final override
	Initialize this updatable. More...

void	update () final override
	Update this updatable. More...

void	forcedUpdate ()
	Send the value of the analog input over MIDI, even if the value didn't change. More...

void	map (MappingFunction fn)
	Specify a mapping function that is applied to the raw analog value before sending. More...

void	invert ()
	Invert the analog value. More...

analog_t	getRawValue () const
	Get the raw value of the analog input (this is the value without applying the filter or the mapping function first). More...

analog_t	getValue () const
	Get the value of the analog input (this is the value after first applying the mapping function). More...

Public Attributes
PitchBendSender< 10 >	sender

Protected Attributes
ManyAddresses< NumBanks >	address

AH::FilteredAnalog< Sender::precision()>	filteredAnalog

Updatable< NormalUpdatable > *	next

Updatable< NormalUpdatable > *	previous

Static Protected Attributes
static DoublyLinkedList< Updatable< NormalUpdatable > >	updatables

Constructor & Destructor Documentation

◆ PBPotentiometer()

PBPotentiometer	(	const Bank< NumBanks > &	bank,
		pin_t	analogPin,
		const Array< MIDIChannelCable, NumBanks > &	addresses
	)

inline

Create a new Bankable PBPotentiometer object with the given analog pin and channel.

Parameters

bank	The bank that selects the address to use.
analogPin	The analog input pin to read from.
addresses	The list of MIDI channels [CHANNEL_1, CHANNEL_16] and optional Cable Numbers [CABLE_1, CABLE_16].

Definition at line 51 of file ManyAddresses/PBPotentiometer.hpp.

Member Function Documentation

◆ begin()

void begin ( )

inlinefinaloverridevirtualinherited

Initialize this updatable.

Implements Updatable< T >.

Definition at line 39 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ update()

void update ( )

inlinefinaloverridevirtualinherited

Update this updatable.

Implements Updatable< T >.

Definition at line 41 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ forcedUpdate()

void forcedUpdate ( )

inlineinherited

Send the value of the analog input over MIDI, even if the value didn't change.

Definition at line 48 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ map()

void map ( MappingFunction fn )

inlineinherited

Specify a mapping function that is applied to the raw analog value before sending.

Parameters

fn	A function pointer to the mapping function. This function should take the filtered analog value of \( 16 - \mathrm{ANALOG\_FILTER\_SHIFT\_FACTOR} \) bits as a parameter, and should return a value in the same range.

See also: FilteredAnalog::map

Definition at line 64 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ invert()

void invert ( )

inlineinherited

Invert the analog value.

Definition at line 67 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ getRawValue()

analog_t getRawValue ( ) const

inlineinherited

Get the raw value of the analog input (this is the value without applying the filter or the mapping function first).

Definition at line 73 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ getValue()

analog_t getValue ( ) const

inlineinherited

Get the value of the analog input (this is the value after first applying the mapping function).

Definition at line 79 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ beginAll()

static void beginAll ( )

inlinestaticinherited

Begin all enabled instances of this class.

See also: begin()

Definition at line 186 of file Updatable.hpp.

◆ updateAll()

static void updateAll ( )

inlinestaticinherited

Update all enabled instances of this class.

See also: update()

Definition at line 190 of file Updatable.hpp.

◆ enable() [1/4]

void enable ( )

inlineinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 100 of file Updatable.hpp.

◆ enable() [2/4]

static void enable ( UpdatableCRTP< Updatable< NormalUpdatable > > * element )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 129 of file Updatable.hpp.

◆ enable() [3/4]

static void enable ( UpdatableCRTP< Updatable< NormalUpdatable > > & element )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 131 of file Updatable.hpp.

◆ enable() [4/4]

static void enable ( U(&) array[N] )

inlinestaticinherited

Enable this updatable: insert it into the linked list of instances, so it gets updated automatically.

Definition at line 134 of file Updatable.hpp.

◆ disable() [1/4]

void disable ( )

inlineinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 110 of file Updatable.hpp.

◆ disable() [2/4]

static void disable ( UpdatableCRTP< Updatable< NormalUpdatable > > * element )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 140 of file Updatable.hpp.

◆ disable() [3/4]

static void disable ( UpdatableCRTP< Updatable< NormalUpdatable > > & element )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 142 of file Updatable.hpp.

◆ disable() [4/4]

static void disable ( U(&) array[N] )

inlinestaticinherited

Disable this updatable: remove it from the linked list of instances, so it no longer gets updated automatically.

Definition at line 145 of file Updatable.hpp.

◆ isEnabled()

bool isEnabled ( ) const

inlineinherited

Check if this updatable is enabled.

Note: Assumes that the updatable is not added to a different linked list by the user.

Definition at line 124 of file Updatable.hpp.

◆ moveDown()

void moveDown ( )

inlineinherited

Move down this element in the list.

Definition at line 151 of file Updatable.hpp.

Member Data Documentation

◆ address

ManyAddresses< NumBanks > address

protectedinherited

Definition at line 82 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ filteredAnalog

AH::FilteredAnalog<Sender::precision()> filteredAnalog

protectedinherited

Definition at line 83 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ sender

PitchBendSender< 10 > sender

inherited

Definition at line 86 of file Bankable/Abstract/MIDIFilteredAnalog.hpp.

◆ updatables

DoublyLinkedList< Updatable< NormalUpdatable > > updatables

staticprotectedinherited

Definition at line 156 of file Updatable.hpp.

◆ next

Updatable< NormalUpdatable > * next

protectedinherited

Definition at line 324 of file LinkedList.hpp.

◆ previous

Updatable< NormalUpdatable > * previous

protectedinherited

Definition at line 325 of file LinkedList.hpp.

The documentation for this class was generated from the following file:

ManyAddresses/PBPotentiometer.hpp

Detailed Description

Enabling and disabling updatables

Main initialization and updating methods

Public Member Functions

Public Attributes

Protected Attributes

Static Protected Attributes

Constructor & Destructor Documentation

◆ PBPotentiometer()

Member Function Documentation

◆ begin()

◆ update()

◆ forcedUpdate()

◆ map()

◆ invert()

◆ getRawValue()

◆ getValue()

◆ beginAll()

◆ updateAll()

◆ enable() [1/4]

◆ enable() [2/4]

◆ enable() [3/4]

◆ enable() [4/4]

◆ disable() [1/4]

◆ disable() [2/4]

◆ disable() [3/4]

◆ disable() [4/4]

◆ isEnabled()

◆ moveDown()

Member Data Documentation

◆ address

◆ filteredAnalog

◆ sender

◆ updatables

◆ next

◆ previous